Choose your footstool legs from the following
Legs 1 to 11A are our standard range of legs. These are included in the cost of your footstool
Legs P1 to P9 are our premium range of legs, add cost shown to your footstool
IF YOU’RE LOOKING FOR A SPECIFIC LEG DESIGN, CONTACT US AND WE WILL TRY & SOURCE IT FOR YOU
Footstool leg 1 (cost of this leg is included in your price)
Shown here with spigot for castor, if required
Leg dimension is 210 x 66 including spigot for castor, 185 x 66 if spigot is removed
Castors are available in brass, antique brass, copper or chrome – Castors are 60mm high and add 35mm to the height of the leg (see castors further down page) eg. This leg is 245mm high with castor fitted
Leg is shown raw, finishes are shown at the bottom of page
Footstool leg 2 (cost of this leg is included in your price)
Shown here with spigot for castor, if required
Leg dimension is 159 x 72 including spigot for castor, 134 x 72 if spigot is removed
Castors in brass, antique brass, copper or chrome – Castors are 60mm high and add 35mm to the height of the leg (see castors further down page) eg. This leg is 194mm high with castor fitted
Leg is shown raw, finishes are shown at the bottom of page
Footstool leg 3 (cost of this leg is included in your price)
Leg dimension is 200 x 56
Castors are not available on this design
Leg is shown raw, finishes are shown at the bottom of page
Footstool leg 4 (cost of this leg is included in your price)
Shown here with spigot for castor, if required
Leg dimension is 114x 72 including spigot for castor, 89 x 72 if spigot is removed
Castors are available in brass, antique brass, copper or chrome – Castors are 60mm high and add 35mm to the height of the leg (see castors further down page) eg. This leg is 149mm high with castor fitted
Leg is shown raw, finishes are shown at the bottom of page
Footstool leg 5 (cost of this leg is included in your price)
Shown here with spigot for castor, if required
Leg dimension is 116x 89 including spigot for castor, 91 x 89 if spigot is removed
Castors are available in brass, antique brass, copper or chrome – Castors are 60mm high and add 35mm to the height of the leg (see castors further down page) eg. This leg is 151 mm high with castor fitted
Leg is shown raw, finishes are shown at the bottom of page
Footstool leg 6 (cost of this leg is included in your price)
Shown here with spigot for castor, if required
Leg dimension is 114 x 85 including spigot for castor, 89 x 85 if spigot is removed
Castors are available in brass, antique brass, copper or chrome – Castors are 60mm high and add 35mm to the height of the leg (see castors further down page) eg. This leg is 149 mm high with castor fitted
Leg is shown raw, finishes are shown at the bottom of page
Footstool leg 7 (cost of this leg is included in your price)
Leg dimension is 155 x 85
Castors are not available on this design
Leg is shown raw, finishes are shown at the bottom of page
Footstool leg 8 (cost of this leg is included in your price)
Leg dimension is 125 x 80
Castors are not available on this design
Leg is shown raw, finishes are shown at the bottom of page
Footstool leg 9 (cost of this leg is included in your price)
Leg dimension is 180 x 75
Castors are not available on this design
Leg is shown raw, finishes are shown at the bottom of page
Footstool leg 10 (cost of this leg is included in your price)
Leg dimension is 141 x 75
Castors are not available on this design
Leg is shown raw, finishes are shown at the bottom of page
Footstool leg 11 & 11A (cost of this leg is included in your price)
Leg dimension is 170 x 53(top) x 35(Bottom)
Leg no 11A dimension is 150 x 70(top) x 25(Bottom)
Castors are not available on this design
Leg is shown raw, finishes are shown at bottom of page
Footstool leg 12 (cost of this leg is included in your price)
Leg dimension is 108h x 86w including spigot for castor, 81h x 85w if spigot is removed
Castors are available in brass, antique brass, copper or chrome – Castors are 60mm high and add 35mm to the height of the leg (see castors at the bottom of this page) eg. This leg is 143 mm high with castor fitted
Leg is shown raw, finishes are shown at the bottom of page179 x 53
Castors are available in polished brass, antique brass, copper or chrome
Castors add £30 to cost of footstool
Below is our premium leg range, same high quality as above but these are a limited production run that incur additional cost
Footstool leg P1 (bobbin turned)
Leg measures 250h x 82 diameter at widest
Height can be reduced where required
This leg design adds £40 to the cost of your footstool
Castors are not available on this design
Leg is shown raw, finishes are shown at the bottom of page
Footstool leg P2
Leg measures 255h x 65 diameter at widest
Height can be reduced where required
This leg design adds £40 to the cost of your footstool
Castors are not available on this design
Leg is shown raw, finishes are shown at the bottom of page
Footstool leg P3
Leg measures 110high x 80 diameter at widest
This leg design adds £40 to the cost of your footstool
Castors are not available on this design
Leg is shown raw, finishes are shown at the bottom of page
Footstool leg P4
Leg measures 115high x 75diameter at widest
Height can be reduced where required
This leg design adds £40 to the cost of your footstool
Castors are not available on this design
Leg is shown raw, finishes are shown at the bottom of page
Footstool leg P5
Leg measures 205 high x 70 diameter at widest
Height can be reduced where required
This leg design adds £40 to the cost of your footstool
Castors are not available on this design
Leg is shown raw, finishes are shown at the bottom of page
Footstool leg P6
Leg measures 80 high x 80 diameter at widest
This leg design adds £40 to the cost of your footstool
Castors are not available on this design
Leg is shown raw, finishes are shown at the bottom of page
Footstool leg P7
Leg measures 150 high x 65 diameter at widest
This leg design adds £40 to the cost of your footstool
Castors are not available on this design
Leg is shown raw, finishes are shown at the bottom of page
Footstool leg P7
Leg measures 100 high x 80 diameter at widest
This leg design adds £40 to the cost of your footstool
Castors are not available on this design
Leg is shown raw, finishes are shown at the bottom of page
Footstool leg P8
Leg measures 70 high x 140 diameter at widest
This leg design adds £20 to the cost of your footstool
Castors are not available on this design
Leg is shown raw, finishes are shown at the bottom of page
Footstool leg P9
Leg measures 250 high x 100 diameter at widest
Height can be reduced where required
This leg design adds £40 to the cost of your footstool
Castors are not available on this design
Leg is shown raw, finishes are shown at the bottom of page
Leg finishes
Our legs can be finished naturally with either an oil, wax or lacquer finish
We can also paint the legs to match your choice of colour
They can also be pre stained prior to your choice of finish in the following colours – Samples are provided with your order
Top left to bottom Right
Limed, clear lacquer, clear wax, clear oil
Jacobean, light oak, dark oak, wenge
Black, antique oak, french oak, sheraton
